General
EN
Motor:
A curtain/blind/shade can be controlled by a single
button. With a SHORT push you can close/open. By pressing
LONG, you can gradually open/close (ref. dimmer).
Motor:
A curtain/blind/shade can also be controlled by two
linked buttons. While the motors run, a pause icon will
replace the arrow.
Messages & alarms
EN
The functions “Messages and Alarms” contain text messages and/or beep tones which
inform that a certain situation has occurred.
An
“ALARM”
always has to be deleted manually. Take care first that the cause of the
alarm is taken away. The alarm is deleted from the different interfaces as described
below.
A
“MESSAGE”
disappears automatically after 2 min or as soon as a new action occurs on
the particular panel (a new action can be: activating a function, receiving another
message or alarm, etc. …).
Snooze
= 2 min postponed so you have time to thumb
through the AURUS-OLED PLUS and do whatever is needed
to be done.
Clear/OK
= Remove the current ALARM/MESSAGE. Make sure
the cause of the message/alarm has been taken care of,
before pressing ‘OK’. Depending on the kind of alarm, in
some cases, even when the alarm remains present and you
click ‘OK’, the alarm text may not be displayed again. Clicking
‘OK’ is only removing the text, not the cause of it.
