Telestream Wirecast Gear 310, User Manual

Page: 19 / 42

19
Installation of
Wirecast Gear
Introduction
This section shows you how to install Wirecast Gear. This includes physical mounting
and wireless connections.
Note: Before installing Wirecast Gear, read through the section on Wirecast Gear
Panels .
Topics

Physical Mounting

Connections
Physical Mounting
Wirecast Gear comes configured for table-top use with pre-attached feet. The unique
size and shape of Wirecast Gear is designed to occupy a minimum of space while
making connectors and cables easily accessible.
Also included with all Gear systems are two pre-mounted rack-mount "ears" and screws
that allow the system to fit into a standard 19-inch rack and take up 2 RU (Rack Units).
This configuration is useful for in-place racks and mobile flypacks where convenient
and safe transport of your live production system is required.
Note:
The rack-mount configuration will require removal of the rubber feet to avoid
obstructing the rack space below. Failure to remove the feet may result in an inability
to mount the unit in the bottom most position of a rack, or if the rack space
immediately below is already occupied.