Installation and Operation
Installing the Lightspeed Server
13
Lightspeed K80 Server Guide
Installing the Lightspeed Server
For all reference information relating to Lightspeed Server installation, refer to Chapter
1, Introduction, in the SuperMicro Server User’s Guide (
www.supermicro.com/support/
resources/results.cfm
). For installation steps, refer to Chapter 2, Server Installation.
Note:
Before proceeding, work with your network administrator to determine
computer and network setting requirements.
Windows User ID and Password
You can log into the Lightspeed Server with the following Windows user account.
:
Getting Started with Vantage
To get started with Vantage, you should review the following topics in the Vantage
Domain Management Guide, and take action as appropriate.
•
If you aren’t familiar with Vantage, read the Domain Management Overview chapter.
•
Review the Network Requirements topic and configure your server accordingly.
•
Create a Vantage Windows user account for the Vantage services to log in with, and
utilize its credentials. This user account should have read/write permissions as nec-
essary for Vantage to have access to all input (monitor/watch) and output locations
and devices (see Before you Install > Windows Authentication Guidelines).
•
Set the computer time (see Before you Install > Time Synchronization Guidelines).
•
Obtain and install the Vantage license (see Before you Install > Installing and
Upgrading Vantage > Enabling a Vantage License).
•
To integrate your Lightspeed Server with an existing Vantage domain, read Install-
ing and Upgrading Vantage > Adding a Server to a Vantage Domain and Adding a
Lightspeed Server to an Existing Vantage Domain, and proceed as appropriate. You
may also want to consult with Telestream Support for any specific instructions
related to upgrading from your current Vantage version to the latest version.
•
If you are not familiar with Vantage, read the first three chapters in the Vantage
User’s Guide to familiarize yourself with the client applications and how to create
workflows and process media in Vantage.
Now, you are ready to start creating workflows and processing media.
Table 2.
Lightspeed Server Windows User Account
User
Administrator
Password
telestream!1
