Installation and Operation
Lightspeed Server Specifications
11
Lightspeed K80 Server Guide
•
MYRICOM 10G-PCIE-8B-S+E 10GbE (V-MYRICOM-10G-SGL)
•
MYRICOM 10G-PCIE2-8B2 Dual Port 10GbE (V-MYRICOM-10G-Dual)
* Not resold by Telestream
Please contact Telestream or your authorized reseller (see
Obtaining Support |
Information | Assistance
).
Note:
The Lightspeed Server has no user-serviceable parts. Any repair or additional
PCI card installation must be performed by Telestream or an authorized Telestream
service technician.
Lightspeed Server Front and Rear Panels
This supplements system interface topics in the SuperMicro Server User’s Guide, Chapter 3.
The Lightspeed Server has a removable front bezel with system interface buttons and
LEDs. The back plane has an optional Fibre-channel card.
Front Bezel LED Indicators and Buttons
The removable front bezel provides a system monitoring and control interface
featuring LED indicators and recessed power and reset buttons.
Figure 1.
Lightspeed K80 Server Front Bezel
LEDs (from left to right)
•
System Overheat | FAN Fail | UID
•
Network Activity (NIC1)
•
Network Activity (NIC2)
•
Hard Drive Activity
•
Power
Reset/UID Button
Systems built prior to August 2013 have a Reset button you can use to perform a
hardware reboot. Systems built after that date have a UID button instead of a Reset
button, and you must use the Power button to perform a system reboot. The UID
button turns off the blue front or rear panel UID LED used to locate a particular unit
among many units in a rack or server room (see
Managing the Lightspeed Server
).
LEDs (as described below)
Buttons (as described below)
