14
PRISM MPI2-10 and MPX2-10 Field Upgrade Kit Instructions
11.
Slide the Mixed Media board out from between the grinches as shown in
Figure 16:
Remove the Mixed Media board from the grinches
12.
Turn the board over and disconnect the GPIO ribbon cable.
CAUTION.
Make sure the back panel is pulled out enough to clear the BNC
connectors on the Mixed Media module. Excessive pressure on the BNCs will
cause damage to the connectors on the Mixed Media and mezzanine boards.
Figure 17:
Remove Mixed Media board
Summary of Contents for MPI2-10-UP PHY
Page 12: ......
