10
PRISM MPI2-10 and MPX2-10 Field Upgrade Kit Instructions
Upgrade the PRISM MPX2-10 Eye mezzanine board
Complete the following steps to remove the currently installed mezzanine board
from the instrument and install the Eye mezzanine board:
1.
Set the instrument so that the bottom is down on a static-free surface.
2.
Remove the top cover as follows:
a.
Use a TORX-driver with a T-10 TORX tip to remove the eighteen screws
securing the cover to the instrument.
b.
Lift the cover up to remove it from the instrument and set it aside.
Figure 9:
Remove the top cover
Summary of Contents for MPI2-10-UP PHY
Page 12: ......
