Voice message on setup
Voice message play
Voice message quota for user
Voice message recording
Voice message set switch
VoIP route call capacity
Wake-up service
Web server
Web server login ID
Web server parameters reset
Web server password
Web server http port
Welcome message
Welcome message download
Welcome message remove
Welcome message upload
XCom API client utility integration
XMan utility integration
XPort utility integration
xSIP (eXtended SIP) Protocol
Xymphony operating system
Xymphony API client support
Xymphony API signaling port
Xymphony API server
TONES
The tones are applied to inform the subscriber about different states of the subscriber
line, network situations or events in the call set-up phase, during conversation or when
subscriber procedures are used to activate, deactivate, interrogate or invoke a
subscriber service. The tones are applied in conformity with ITU-T Recommendation
Q.35. The levels of the tones are stated in dBm0 at the exchange in which the tone is
inserted. The harmonic distortion of all tones is <1%. The accuracy of the timing is
better than 10%.
•
Cadences,
•
Levels, and
•
Frequencies
of the tones are programmable without interrupting the operation of the
PX24U/PX24M Hybrid IP PBX.
Some editable tones are:
•
"Dial tone" : It is normal dial tone when the user is in idle state
•
"Diversion activated": It is tone when unconditional call diversion function is active
•
"Authorization modified": It is tone when allowed call class (user) is different from
the allowed call class (system). That is the user modified his authorization level for
password-dialing
•
"Delayed hot line": It is tone when delayed hot line service is active.
•
"Confirmation": It is confirmation tone when a service call is accepted by the system.
•
"Vacant": It is tone when dialed digits are not sufficient to route the call.
•
"Busy": It is tone when the destination is busy.
•
"Overflow": It is tone when there are no system resources to route the call or to
activate a service.
•
"Howler": It is tone when the first digit dialing time-out occurs.
•
"Local call ring 1": It is ring and ringback tone type-1.
•
"Local call ring 2": It is ring and ringback tone type-2.
•
"Local call ring 3": It is ring and ringback tone type-3.
•
"Local call ring 4": It is ring and ringback tone type-4.
17
Summary of Contents for PX24M
Page 1: ...PX24U PX24M HYBRID IP PBXs...
