A detailed record for each call and service use may be generated by Xymphony
(operating firmware of the X1) and is transmitted to Telesis XPort Software Utility
(running on the maintenance or billing PC). Each record in the database holds details
of a call, including:
•
sequence number
•
type of record
•
date and time of the record generated within the Telesis system
•
duration of the call in the record
•
port access code (address), which is to be billed
•
port access code, which made a password protected call
•
outgoing port or the called port address
•
digits received from the originating port
•
replaced digits after routing analysis for an outgoing call
•
password for a password protected call
•
time of alarm indication for a wake up call
•
calling party number for an incoming call
•
number of the calling party
•
total number of charge pulses received (real charge pulses)
•
total number of locally generated charge pulses (pseudo charge pulses)
•
channel information for CCS signalling ports
•
reference number of the call
•
switching system's name
•
services used for the call like Last number redial, Dial from user pool, Dial by
special key, System controlled hot line, User controlled hot line, Redial in
incomplete, Redial destination busy, Alerting timeout, No information, User
controlled call forwarding (BRI ISDN), User controlled unconditional call
forwarding, User controlled call forwarding busy, User controlled call forwarding
no reply, System controlled unconditional call forwarding, System controlled call
forwarding busy, System controlled call forwarding no reply, Call tranfer after
answer, Call back, User controlled divert routed call, Call transfer while the
destination is busy, Call transfer while the destination is ringing, Alternative
routing
XPort can send call records to a printer or a text file in a user-defined line format.
The PX24U/PX24M Hybrid IP PBX has no hardware parts that require periodic
maintenance. However, the call data accumulated in the PX24U/PX24M Hybrid IP
PBX's solid state disc should periodically be downloaded through XPort to its database
to create space on the system's disc.
SYSTEM AND USER SERVICES
Telesis PX24U/PX24M Hybrid IP PBX systems provide, at least, system features,
system parameters, and user services, described below. If it is desired, these may be
activated or deactivated.
Many of the user services, mentioned below, are applicable for SIP calls with using the
basic SIP supplementary services such as Invite (call hold), call forward and call
transfer (with refer method). Similarly, these services are also applicable for H.323
calls with using the basic H.450 supplementary services.
For ensuring the easy and fast programming of the PX24U/PX24M Hybrid IP PBX,
each programmable parameter is set to a default value. The standard default values are
carefully selected and optimized for a wide range of organizations' requirements. Thus,
the flexibility does not bring a complexity.
Access code
Accessible while alerting
Account code
Account name
Advice of charge coefficient
Advice of charge coefficient as divider
AES-256 media encryption
Alerting message
Alerting transfers do not clear
Alternative routes
Alternative route causes
Alternative ACD system messages
10
Summary of Contents for PX24M
Page 1: ...PX24U PX24M HYBRID IP PBXs...
