Accessories
If you’ve purchased your ROBO210R-SDI system with a
ClockOne
or
TallyOne,
mounting is very
easy. To mount your
ClockOne
, simply remove the two Philips head screws on the front of the
monitor (Photo A). Then insert the two long bolts provided with your clock through the holes at
the top center of the clock. Then thread the bolts into the two holes on the face of the monitor
until tight. (Photo B).
PHOTO A
PHOTO B
If you’ve purchased a
TallyOne
, your top rail of the beamsplitter frame will hve two threaded holes
in it (Photo C). Simply attach the provided tally bracket (Photo D), and then attach the tally to the
bracket (Photo E).
PHOTO C
PHOTO D
PHOTO E
