Page 10 of 21
Step 6
Attach and unfold the hood and mask
Unfold the “wings” and simultaniously
press up so the velcro on the wings meets
the velcro on the sides of the frame.
Secure by lightly pressing along the edge
of the hood and frame. With the hood in place
position the mask and secure
it to the hood using the velcro in the
outside of the hood opening.
(Figure 6)
Step 7
Attach camera
Insert the camera into the Camera Quick
Release Plate that was attached to the
GlidePlate in Step 2. Pull the conical mask
around the lens and adjust the hood height if
necessary.
(Figure 7)
Step 8
Attach Power and Video Cable Harness
Attach the power and video cable harness to
the monitor using the locking clip.
IMPORTANT NOTE:
Only attach the cable
harness locking clip to the connection on the
RIGHT
hand side of the monitor. Inserting the
cable harness into the
incorrect port
will result
in damage to the monitor that is not covered
under warranty.
(Figure 8)
Figure 6
Figure 7
Figure 8
