Teleorigin RBMTX-Lite, User Manual

Page: 53 / 70

When the scan is complete you can see list of available devices in the table. You can
review information like IP address, MAC address, device name, firmware version and uptime.
If you want to restore factory settings on any device on the list, click the Reset button and
enter IMEI. Program will send special packet to all devices, but only the one with IMEI you
have entered will be affected. If the IMEI is correct and the factory settings have been restored
you should see ,,IMEI OK'' in one of cells of last column. This device will now reset to load new
settings and after about 1-2 minutes it will confirm that whole operation was successful - you
should see then that ,,IMEI OK'' will change to ,,done''.