Teleorigin RBMTX-Lite, User Manual

Page: 17 / 70

5.2 Router configuration
Router is configured via web browser. Modem settings are divided into sections which
allows user to easily find needed option. If you need to save new settings please apply them
using “Save settings”. You can also discard changes by choosing appropriate option from
menu.
WARNING: Cache of router is cleared on device reset.
NOTE: Not all tabs are available on every modem version.
5.2.1 Setting up the connection
When you connect all necessary cables (see Setting up the modem) you can setup
connection. Connect LAN cable to your computer and go to Internet protocol TCP/IP
properties (
Network connections -> Local Area Connection ->Internet protocol TCP/IP->
Properties ) and set your IP address as 192.168.1.x. Please read how to change TCP/IP
settings of your network card in this thread (example for Windows 7):
http://windows.microsoft.com/en-us/windows/change-tcp-ip-settings#1TC=windows-7
5.2.2 Modem status page
Go to your web browser and put IP address 192.168.1.234 . You will be asked for
username and password. By default it is:
Username: admin
Password: 12345
If everything is configured correctly you should see following screen:
This is status page of RBMTX-
Lite router. Here you can check if
modem is connected to network,
its parameters and information
about PPP connection. Device
status page is refreshing
automatically.