Teleorigin RBMTX-Lite, User Manual

Page: 64 / 70

11Safety Recommendations
READ CAREFULLY
Be sure the use of this product is allowed in the country and in the environment
required. The use of this product may be dangerous and has to be avoided in the following
areas:
•
Where it can interfere with other electronic devices in environments such as hospitals,
airports, aircrafts, etc
• Where there is risk of explosion such as gasoline stations, oil refineries, etc
It is responsibility of the user to enforce the country regulation and the specific
environment regulation.
Do not disassemble the product; any mark of tampering will compromise the
warranty validity.
We recommend following the instructions of the hardware user guides for a correct
wiring of the product. The product has to be supplied with a stabilized voltage source and the
wiring has to be conforming to the security and fire prevention regulations.
The product has to be handled with care, avoiding any contact with the pins because
electrostatic discharges may damage the product itself. The same cautions have to be taken for
the SIM, checking carefully the instruction for its use. Do not insert or remove the SIM when
the product is in power saving mode.
The system integrator is responsible of the functioning of the final product;
therefore, care has to be taken to the external components of the module, as well as of any
project or installation issue, because the risk of disturbing the GSM network or external
devices or having impact on the security. Should there be any doubt, please refer to the
technical documentation and the regulations in force.
Every module has to be equipped with a proper antenna with specific
characteristics. The antenna has to be installed with care in order to avoid any interference
with other electronic devices and has to guarantee a minimum distance from the people
(20 cm). In case of this requirement cannot be satisfied, the system integrator has to assess
the final product against the SAR regulation.
1. The unit does not provide protection from lightning and surge. For outdoor
installation use outdoor nonmetallic case safety approved according UL 50. Additionally you
should provide protection from lightning and over voltage according National code.
2. Be sure the use of this product is allowed in the country and in the environment
required. The use of this product may be dangerous and has to be avoided in the following
areas: Where it can interfere with other electronic devices in environments such as hospitals,
airports, aircrafts, etc. Where there is risk of explosion such as gasoline stations, oil refineries,
etc. It is responsibility of the user to enforce the country regulation and the specific
environment regulation. Do not disassemble the product; any mark of tampering will
compromise the warranty validity. We recommend following the instructions of the hardware
user guides for a correct wiring of the product. The product has to be supplied with
a stabilized voltage source and the wiring has to be conforming to the security and fire
prevention regulations. The product has to be handled with care, avoiding any contact with