Telenetics Global Carrier, User Manual

Page: 150 / 289

Page 150
AT %C Compression Control
Data compression is a technique used to reduce the size of data being transmitted without losing
any of the original information.
Compressed data must be decoded at the receiving end of the communications path in order to
extract the original information.
Full details on the subject of data compression can be found in the Error Correction Section of
this guide.
☞ ☞ ☞ ☞ ☞
When selecting a data compression mode, error correction must also be selected.
(See the \N command for details of error correction.)
Options
AT%C0 Compression disabled
AT%C1 MNP 5 compression enabled
AT%C2 V.42bis data compression enabled
AT%C3
■
V.42bis data compression enabled with fallback to
MNP 5
See Also
\N command Error correction
*V command V.42bis compression table size
Examples
AT%C3\N3 Select V.42bis with auto-reliable error correction
AT%C1\N3 Select MNP5 with auto-reliable error correction
Range
0-3