Telemotive Engineered XLTX Transmitter Instruction Manual
May 2011
Page 15 of 40
Use the following table to properly set the dip switches for the correct battery type (see Figure 9
for dip switch view):
Battery P/N
Battery Type
Dip switch 1
Dip switch 2
Dip switch 3
BT129-0 4.5V
Alkaline
Off
Off
Off
BT128-0 3.6V
NiMH
Off
On
Off
Figure 9: Dip switch block as viewed through USB/IR port
NOTE: The dip switch block switches are oriented that the off position is next to the number
designator and the on position is up or away from the number designator.
3.2
TURNING THE TRANSMITTER ON AND OFF
The XLTX uses both a three position toggle switch labeled OFF-ON-START and a Machine Stop
switch to turn the transmitter on or off.
Figure 10: Machine Stop Switch and OFF-ON-START toggle
