blue PiraT2 / 5E / 5E
User Guide
Datum: 21.09.2016
Seite 11 von 71
blue_PiraT2_UserManual_V2.4.1.doc
5.2 Model versions of blue PiraT2 / blue PiraT2 5E
The blue PiraT2 supports a lot of bus systems which can be recorded by the data logger. This
table shows which model of the blue PiraT2 supports which number of interfaces and channels.
Table 5.1: Model versions of blue PiraT2 / blue PiraT2 5E
The model name gives a hint to the integrated interfaces, e.g., blue PiraT2 150M14C8LFR: 1x
MOST150, 12x HS-CAN, 2x LS-CAN, 8x LIN, 2x FlexRay a/b, 1x 1-Gbit-Ethernet and 4x 100-
Mbit-Ethernet interfaces. Low Speed and High Speed CAN are counted only as CAN. The vari-
ous interfaces are explained in later chapters.
Attention:
Based on the specification of the hard drive, the data logger should always be fitted ver-
tically or horizontally (upright or upside down).
Please avoid tight bending of the MOST150 fiber optic cables.
