Remote Control Touch
User Guide
Datum: 10.03.2016
Seite 21 von 57
RCTouch_UserGuide_V2.3.1.doc
6.3 Tab sheets
In the applications
Driver View and
Settings, the number and naming of the tab
sheets is set.
The application
Busload contains one tab sheet for each available interface of the con-
nected loggers, with the exception of
[GPS]
and
[MOST150]
. The tab sheets are named after
the respective bus interface.
If multiple loggers with active GPS resp. MOST150 are connected, each GPS resp. MOST inter-
face is assigned a tab sheet.
The application
Status contains minimum two tab sheets:
the tab sheet
[Overview]
and
the tab sheet of the Remote Control Touch with the name assigned in the Telemotive
System Client.
If more devices in a TSL network are cable-connected with the Remote Control Touch, each
device is assigned a tab sheet named after it.
6.3.1 Overview
The window of the tab sheet
[Overview]
contains, apart from the trigger counter at <Trigger
Count>, a tabular overview of all connected devices and the Remote Control Touch with the
following displays:
Figure 6.4: Tab sheet
“Overview”
