SWITCH SETTINGS
There are installer selectable switches located on the bottom base underneath a protective plastic overlay. These switches are
hidden behind a plastic cover for security. To locate, remove the plastic covers using a sharp pointer or paper clip as shown.
4
Line Voltage Selectors (Optional Feature)
The 3002MWD is designed to operate behind PBX telephone systems rated be-
tween 24 volts and 48 volts. If you have this feature, there are line voltage
selector switches that must be set according to the PBX system rating that the
phone will be installed. There are two (2) switches, the first for Line 1 and the
other for Line 2. Each switch has three (3) setting options. They are: “24V/48V/
OFF”. Set the switches by simply sliding to the appropriate setting. The ”OFF”
setting is used to turn off the line if a line appearance is not wired to the tele-
phone.
Note: the factory default is set to the “24V” setting.
Message Waiting Selector
The 3002MWD can support 90VDC neon or low-voltage LED message waiting
systems. Simply slide the switch to the desired position that is compatible with
your PBX messaging system.
Note: the phone is factory preset to the “Neon” setting.
Summary of Contents for 3002MWD
Page 5: ...CONTROLS 2 ...