Step by Step
Using Other Functions
76
Controlling Relays
If this function has been configured (contact your service personnel),
you can turn up to four relays on and off to control different facilities
(such as a door opener).
Depending on how they are programmed, you can switch the relays
on and off or switch them on and have them switched off automati-
cally after a timeout.
>
:
Select and confirm.
or
>
:
or
qmd
or
rmd
Enter the code for "on" or "off".
e
...
h
Enter the relay.
Sensors (T-Octophon F 200/400 Only)
If this function has been configured (contact your service personnel),
sensors detect signals, causing your phone to ring and a message to
appear on your screen.
Radio Paging
If paging equipment is connected to your system (contact your serv-
ice personnel), you can contact people via their pocket receivers.
The pocket receiver indicates to the person you are looking for that
someone is trying to get in touch. The person you page can then go
to the nearest telephone and call you.
The operating procedures differ according to the type of radio pag-
ing equipment connected (simple or enhanced paging equipment).
Special features must be taken into consideration if your tel-
ephone operates with IP Netpackage (system networking via
*90=Control Relay On?
#90=Control Relay Off?
