Telegesis ZigBee GW357 Product Manual Download Page 32

 

 

 ZigBee Communications Gateway 

 
 

©2013 Telegesis (UK) Ltd 

-32- 

 ZigBee Communications Gateway 

 

5.  If the goods are to be manufactured or any process is to be applied to them by Telegesis in 

accordance with a specification submitted by the Buyer, the Buyer shall indemnify Telegesis 
against all loss, damages, costs and expenses awarded against or incurred by Telegesis in 
connection with or paid or  agreed to be paid by Telegesis in settlement of any claim which 
results from Telegesis use of the Buyers specification, including but not limited to any claim 
for  infringement  of  any  patent,  copyright,  design,  trade  mark  or  other  intellectual  property 
rights of any other person. 

6.  Telegesis liability hereunder shall be in lieu of any other representation (unless fraudulent), 

warranty or condition, expressed or implied by law or otherwise with respect to the goods or 
any liability imposed by common law, statute or otherwise and Telegesis hereby excludes all 
such representations (unless fraudulent), warranties and conditions and shall not be liable to 
the Buyer for any loss or damage whatsoever (including without prejudice to generality of the 
foregoing  any  liability  in  contract,  negligence,  or any  other tort for  indirect  consequential  or 
economic  loss  or for  loss  of  profit  or  opportunity  of  any kind)  arising  directly  or  indirectly  in 
connection  with  the  contract,  the  Goods  or  otherwise  except  insofar  as  any  exclusion  or 
limitations of Telegesis liability hereunder is prohibited, void or enforceable by law.  

7.  Telegesis  shall  not  be  responsible  in  any manner  whatsoever for  any  software,  information 

or  memory  data  stored  on  or  integrated  with  any  of  the  Goods  returned  to  Telegesis  for 
repair or replacement under this warranty. 

8.  Without prejudice to any other provision in these Terms, in any event Telegesis total liability 

for any one claim or for the total of all claims arising from one act of default on Telegesis part 
(whether  arising  from  Telegesis  negligence  or  otherwise)  shall  not  exceed  the  purchase 
price  of the Goods  the  subject matter  of any  claim  but  nothing  herein  shall  limit  or  exclude 
Telegesis  liability  for  death  or  personal  injury  caused  by  Telegesis  negligence  or  Telegesis 
liability for fraudulent r misrepresentation. 

9.  Where the buyer  deals as a consumer within the meaning of the unfair contract Terms Act 

1977 nothing in these terms shall restrict or exclude any liability of Telegesis for breach of its 
implied undertakings as to conformity of the goods with description or sample or as to their 
quality or fitness for the purpose. 

10. In the case of a consumer transaction nothing in these terms sham affect the statutory rights 

of  the  Buyer  as  defined  in  the  Consumer  Transaction  (Restrictions  on  Statements)  Order 
1976 (as mentioned). 

11. The period or terms of the warranty contained in this clause shall only be varied or extended 

where Telegesis has granted the Buyer an Extended Warranty. 

 

 

 

Caution        

The  user  must  read  through  the  user  manual  and  learn  to  use  the  equipment  appropriately. 
Telegesis  (UK)  Ltd  will  not  accept  any  liability  arising from  using the  equipment  in  the manner  not 
specified by the documentation accompanied by the equipment.  

Cleaning 

Dust  or  wipe  only  with  damp  cloth;  do  not  allow  moisture  to  penetrate  the  enclosure.    Do  not  use 
aggressive cleaning agents 

 

Summary of Contents for ZigBee GW357



































Reviews: