15
Subwoofer (optional)
A subwoofer speaker can be fitted
within the TV case as an option
depending to the model.
By 33”(84cm) TV sets there
is an external subwoofer (optional)
to be fixed as shown below.
Select SUBWOOFER in FEATURES
menu,
Press the
Volume up
button to
switch the Subwoofer on or off.
Please Note
If you move the loudspeaker switch, on the
rear of the TV, to the external position, the
internal speakers in the TV will be switched
off but the Subwoofer will remain on if
switched on.
Setup menu (blue button)
Program edit menu (yellow button)
These two menus are explained under
‘Tuning the TV’.
Sleep timer
Allows you to preset the period of time
before the TV will switch off automatically.
Press the
Volume up
button to
increase the time period in 5 minute
steps from 5 minutes to a maximum
of 2 hours and to switch the sleep
timer off.
The countdown will start immediately.
To cancel the sleep timeselect OFF in
SLEEP TIMER row by using
Volume
buttons.
Language
There are many languages available for the
On Screen Displays (OSD).
Press the
OK
button to select the
language list.
Press the
Program down
button to
page through all the languages and
OK
to select.
Dynamic Bass (optional)
Set DYN BAS to ON if you wish to
deepen the bass sound specifically.
On TV sets with subwoofer if the
Dynamic Bass is turned ON
subwoofer will be turned on
automatically and cannot be changed
by user.
OK
OK
On Timer
Your TV set has a feature which allows the
TV to be turned on with your selected program
after a pre-selected period ranging from 5
minutes to 12 hours.
Press the "VIOLET" colour button.
Choose the AUTO ON line with “
PR
▲
” or
“
PR
” button.
Using number buttons enter the number of
the program that you wish the TV turns on.
You can choose one of the AV's instead of
the program number by pressing the "AV"
button. You can return to the program number
with TV/TXT button.
Using “
VOL
” or “
VOL
” button enter
the period after which your TV should turn
on automatically with 5 minutes steps. Your
TV will be turned on the selected program
automatically if it is in "stand-by" mode, or
will change over to the selected program at
the end of this period if it is "on" mode.
