Telefunken TM 110 COSI, Operating Instructions Manual

Page: 9 / 27

9
to validate. Please note that by deleting the numbers, the contacts
will be permanently erased.
To delete all your contacts on the SIM card alone
1. Press to select Delete , then press to validate.
2. Use the arrow to select Delete from the SIM card , then press to validate.
to validate. Please note that by deleting the numbers, the contacts
will be permanently erased.
NOTE: To delete all the contacts from the telephone alone and leave the contacts on the SIM card intact, the
procedure is the same as in the following point. However, you must select Delete from phone in step 2.
To copy a contact
1. To copy a contact from one storage location to another (from the SIM card to the telephone or the contrary), press
to select Copy , then press to validate.
2. Use the arrow to select Copy from
3. Use the arrow to select Choose
4. Select the current storage location of the contact then press
to validate
5. Use the arrow to select Copy to
6. Use the arrow to select Choose
7. Select the location where you would like to save the contact then press
to validate
8. Use the arrow to select Choose
9. Press
to display the options. Use the arrow to select Copy, then press to validate
10. Press to select the contact to be copied, then press to validate the choice. Repeat this step to add as
many contacts as you wish.
11. Press
to display the options. Use the arrow to select OK, then press to validate
NOTE: To copy all your contacts, follow the procedure above. At step 10, press
, then select Tick all. You can
then go on to step 11.
To move a contact
To move a contact, the procedure is exactly the same as the procedure for copying a contact. The only difference is
that when the contact is moved, it is deleted from the original storage location and only appears in the chosen storage
location. So
To copy a contact
Abbreviated numbers (Direct access memories)
Abbreviated numbers are contacts that you dial the most often or to whom you would like to have quick
access. You can attribute a telephone number to the two direct-dial Keys, M1 and M2, located at the bottom of the
keypad. You can also attribute a number to the keypad keys (from the 2 key to the 9 key).
The number that is registered can then be dialled by pressing and holding the key that is attributed to it.
Start by registering these contacts in the Address book.
1. Next, in Contacts, press
to select Abbreviated numbers.
2. Select one of the figures (from 2 to 9) or one of the free direct access memories (M1 or M2), then press to
validate.
3. Press
again to Edit.
4. Press to display your contacts and use the arrow to select the contact to which you would like to attribute the
short-cut and press to validate.
NOTE: You can also enter the phone number and then validate.
5. Press
to validate