Telefunken TM 110 COSI, Operating Instructions Manual

Page: 5 / 27

5
2. Installing the memory card
To install the micro-SD card (if you have one), open the back cover to remove the battery, release the card lock, insert
the card into the slot and replace the lock and the battery before restarting the mobile phone.
NOTE: SIM cards and micro-
3. Installing the battery
This mobile phone is suitable for the original accessories and battery.
Install the battery by sliding it into the battery compartment with the contacts facing downwards to the left, in order to
prevent the battery contact surface from being damaged. Then, replace the battery compartment cover.
4. Charging the battery
For the first and subsequent uses, charge the phone battery. The icon is displayed when the battery is low.
To charge the battery, connect the charger end (micro USB port) to the phone charging port, and the adaptor to a
wall socket. The
icon is displayed once the battery is fully charged. You can then disconnect the charger from the
phone and from the wall socket. Do not leave the battery connected to the charger for more than 12 hours, since
overcharging may shorten the life span.
You can also use the charger base. Connect the USB cable to the charger base and to the wall socket. Put the phone
on the charging dock; it will start charging automatically.
WARNING: When a travel charger and its accessories are used to charge the battery, please verify beforehand
whether they are authentic or approved by the manufacturer. You run the risk of damaging your mobile phone when
you use other accessories. Always use them indoors and in dry places.
Avoid discarding the battery by burning as this can cause a fire. Damaged batteries can cause an explosion. Refer to
the detailed safety instructions concerning the precautions for use of the battery.
5. Turning on the phone
Press and hold the red key for three seconds to turn the phone on or off. If no SIM card is inserted or if the SIM

When you turn on the phone for the first time, you might need to enter a PIN code (supplied with the SIM card).
Enter the code and press the
key.

Next, choose your language. Press the key, choose you language from the list and again press . Then
choose your keypad input Language using the Down Arrow key. Once your selection is made, confirm your
choice. Press the
key to continue.

To set the date and time, use the keypad to enter the date and press to confirm. Then, enter the time and
again press .
Your phone is now ready to be used.
To access the main menu, press the key. In general, to confirm a choice (OK) or see a list of options in a
menu, use the key. To go back or cancel an option, use the key.
By using the and keys you can scroll through the menus.
To lock or unlock your phone, move the slider on the bottom right hand side of the phone up or down.