Telefunken TF-RS9200 Manual Download Page 30

- 29 -

Specifications

GENERAL

• Adaptor Input Voltage : 100-240V~ 50 Hz
• Adaptor Output Voltage : 12V DC
• Input Frequency : 950 - 2150 MHz
• Maximum Power Consumption : 17W
• Operating temperature : 5ºC - +40ºC
• Storage temperature : -20ºC +70ºC
• Humidity : 25 to 75 % rel
• Physical Dimensions : 110 x 82,20 x 22,60 mm
• Weight : 0,29 kg

HARDWARE CONFIGURATION

• Main Processor : M-STAR MSD7819
• Flash Memory : 16 Mbyte
• DDRAM : 128 Mbyte

Remote Control

Operating Distance:

 7m Max.

Batteries : 

2x1.5V (R-03/AAA)

Digital Capabilites

Transmission Standarts:

DVB-S, DVB-S2, MPEG2/HD ,MPEG4

Demodulation:

QPSK, DVB-S      1-45Msym/s
QPSK, DVB-S2    1-45Msym/s
8PSK                    1-45Msym/s
FEC Modes:
• QPSK, DVB-S                       1/2, 2/3, 3/4, 5/6, 7/8.
• QPSK, DVB-S2    1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10.
• 8PSK                    3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10.

Video:

• HD MPEG-4 
• Aspect ratio; 4:3, 16:9
• Mpeg 1/2/4, H.264 ve VC-1

Audio:

• For all MPEG levels for layer I / II 
• Sampling frequencies supported are 32 kHz, 44.1 

kHz or 48 kHz.
• Output can be chosen as STEREO, LEFT or RIGHT 

only  (on  both  outputs).This  is  useful  for  dual  mono 

channels in order to select the correct sound track.

• Wide dynamic range (16-bit resolution)
• Mpeg-1, Mpeg-2 (Layer I/II), MP3, AC-3

LNB POWER SUPPLY

• Vertical : 13/14 Volt

• Horizontal : 17/18 Volt
• Max. Output Current: 300mA (Short-circuit protected)
• 22 kHz Tone : Frequency 22KHz ± 2 KHz
: Amplitude 0.6 Vpp ± 0.2 Vpp

USB POWER SUPPLY

5V @ 500mA max

Front Panel

  Indicator

  4 digit indicator is 7 segments.

Audio/Video & Data Input/

Output 

HDMI Output             (Audio and Video)

Digital Audio Output            (Audio)
Scart Output (Audio and Video)  

Conformity Information

The satellite receiver complies with the following 

standards and norms:
In  regard  to  the  conformity  with  fundamental 

requirements  and  relevant  regulations,  this  device 

complies with EMC Directive 2004/108/EC as well as 

with Directive 2006/95/EC for Low Voltage Equipment. 

Ecodesign requirements for energy-related products 

(Directive 2009/125/EC according to Implementing 

Regulation No. 642/2009).

EN 55013:2001+A1:2003+A2:2006
 EN 55022:2010/AC:2011 – Class B
EN 61000-3-2:2006+A1:2009+A2:2009 
EN 61000-3-3:2008
EN 5020:2007+A11:2011 
EN 55024:2010

IEC60065:2001+A1:2005+A2:2010
EN60065:2002+A1:2006+A11:2008+A2:2010
+A12:2011

 

WARNING

This is a Class A product. Using this 

product in a domestic environment may 

lead to radio interferences. In such a 

case, the user might possibly need to take 

relevant measures.

Summary of Contents for TF-RS9200

































Reviews: