Telefunken TF-LED50S7T2, Instruction Manual

Page: 11 / 34

Operation
11
11
Operation
search.
•
ATV Manual Search
: select this option
to scan for available analogue channels
manually.
First select channel number by pressing
ENTER/RIGHT or input the number directly.
Select “Search” and press ENTER to start the
current channel search. You can also fine tune
the channel frequency for a better reception.
Feature setting
Feature
Lock
Language
Clock
Sleep Timer
Auto Power Off
Hearing Impaired
CI Info
PVR/Timeshift
MENU: Return EXIT: Exit
Move ENTER: Enter
• Lock
Lock Channel: On/Off. A password is
required to view channels that are locked.
Parental Lock: Off/4-18. Toggle the parental
lock and set the age level permission for
certain programmes.
Change PIN Code: Press ENTER/RIGHT
to set a New Password then enter a 4-digit
number you want to set twice.
• Language : Select a System Language
which includes OSD Language, Preferred
Subtitle, Preferred Audio, Digital Teletext
Language, Analog Teletext Language.
• Clock : set the current system time and set
the time zone and DST (daylight saving time).
•
Sleep Timer
: select the period (10-240
min) after which the TV will automatically
power off.
• Auto Power Off : select the period after
which the TV will automatically power off.
• Hearing impaired : This function allows
the use of close captions for people with
hearing impairements (where available).
•
CI Info
: select this option to enter the
common interface submenu. Only available
when a CI card inserted in the PCMCIA slot in
DTV mode.
• PVR/Timeshift : enter the PVR submenu
to setup digital channel recording. More info
is listed in the PVR/Timeshift section of this
manual.
Setup menu
Setup
OSD Timer
Auto SCART
PC Setup
Blue Screen
Reset TV Setting
Software Upgrade
MENU: Return EXIT: Exit
Move
ENTER: Enter
• OSD Timer : 5s/10s/15s/20s/25s/30s/
Never. Select the period after which the
elements of OSD menu disappear.
•
Auto SCART
: switch to Auto SCART
function (if available).
• PC Setup
Available only when PC is selected as a
signal source.
Auto Adjust: adjust all the parameters
automatically.
H Position: manually adjust the horizontal
position.
V Position: manually adjust the vertical
position.
Phase: manually adjust phase.
Clock: manually adjust clock.
•
Blue Screen : set on or off blue screen
activation when there is no TV signal in ATV
mode.
• Reset TV Setting : reset the parameters to
initial factory settings. May require a password
and user confirmation.
• Software upgrade : this option is intended
for using by qualified technicians only.