Telefunken PDF 7322, Insruction Manual

Page: 4 / 14

3
Non contractual document subject to change in case of typographical errors (Mktg0710) COPYRIGHT SOPEG 2010)
ENG
L
ISH
(SLIDESHOW) Start the photo slideshow directly
SETUP
Access setup menu (Settings) directly
4. Installation
- Take your frame and its accessories out of their packaging.
- Remove the plastic film protecting the front of the frame.
- Pull the plastic tab protecting the contacts in the remote control.
- Stand the frame in the desired location, pulling the adjustable stand towards you (see diagram
above).
- Connect the electrical cord to the frame in the space provided.
- Plug your frame into an outlet. Your frame will start up automatically.
II. Use your frame
1. Selecting a language
During its first use, the frame will display an initial screen allowing you to
choose the language.
- Select your language using the arrow keys on the remote control,
then press “Enter”.
Once you have selected your language, your frame will begin to read the
photos contained in its internal memory.
2. “ECO LOGIC™” mode
ECO LOGIC™ mode combines 3 essential elements to reduce energy consumption by over 40% compared
to a standard frame:
- A LED screen, which uses less energy while improving image quality
- A low-energy and “Energy Star”-certified power adapter
- A light sensor
This sensor, on by default, will automatically turn off your picture frame at night and turn it on during the day.
You can deactivate the light sensor in your frame’s system settings menu.
3. Reading a memory card or a USB key
If your frame is off:
- Insert your card or USB key in the space provided.
- Switch on your frame: The slideshow will automatically
play the contents of your memory card or USB key.