English
- 43 -
Viewing the Connections
NOTE: When connecting
a device via the Side AV
input, you must use the
supplied connection cables
to enable connection. See the
illustrations above.To enable
PC audio, you will need
to use PC/YPBPR AUDIO
C O N N E C T I O N c a b l e ’s
WHITE & RED inputs. If an
external device is connected
via the SCART socket, the
TV will automatically switch
to AV mode.When receiving
DTV channels (Mpeg4 H.264)
or while in Media Browser
mode, output will not be
available via the scart socket.
When using the wall mounting
kit (optional), we recommend
that you plug all your cables
into the back of the TV before
mounting on the wall. Insert
or remove the CI module only
when the TV is SWITCHED
OFF. You should refer to the
module instruction manual
for details of the settings.
Insert the CAM and then the
viewing card to the slot that is
located in the terminal cover
at the rear side of the TV. The
module should be correctly
inserted, it is impossible to
insert fully if reversed. The
CAM or the TV terminal may
be damaged if the CAM is
forcefully inserted.
Connector
Type
Cables
Device
Scart
Connection
(back)
VGA
Connection
(back)
PC/YPbPr
Audio
Connection
(back)
HDMI
Connection
(bottom&side)
SPDIF
(Optical Out)
Connection
(back)
Side AV
(Audio/Video)
Connection
(side)
Side AV
Connection Cable
(supplied)
Headphone
Connection
(side)
YPbPr
YPbPr Video
Connection
(back)
YPbPr Connection
Cable(not supplied)
USB
Connection
(side)
CI
Connection
(side)
CAM
module
Subwoofer
Connection
(back)
