User Guide
PAGE 77
Arm/Disarm Mode
TeleEye GX supports 3 different modes of arm/disarm operation:
•
Hardware: Use Arm input to arm/disarm, suitable for local operation
•
Software: Use software to arm/disarm, suitable for remote operation
•
Schedule: Follow preset schedule to arm/disarm, suitable for unmanned location
Under software and schedule mode, the security switch is not applicable.
There are 2 types of arm schedules:
Normal Schedule
User can set the arm period in terms of weekday. The
system would arm according to this weekly schedule.
Holiday Schedule
User can set the arm date and period for specially
handled holiday. If the date is set to holiday schedule, it
will follow holiday schedule instead of normal schedule.
Arm/Disarm Tamper Type
Arm/Disarm tamper event triggers if someone cuts the wire between the arm/disarm input
and the digital video recorder. This event can be triggered once the wire is being cut.
Arm/Disarm tamper type has choice of none, SEOL and DEOL.
Arm State
If arm state is set to close, it indicates arm of TeleEye GX when the state of the circuit is
close and disarm of TeleEye GX when the circuit is open. Oppositely, if arm state is set to
open, it indicates arm and disarm of TeleEye GX when the state of the circuit is open and
close respectively.
Physical Configuration for Arm/Disarm
The arm/disarm input and ground of TeleEye GX HD Digital Video Recorder needs to
connect to a control unit which is commonly a switch or password panel for arm/disarm
input.