Teledyne UA-6, Installation And Operation Manual

Page: 27 / 122

UA-6 Detector
Section 2 Preparation for Use
2-3
2.4 Attachment of the
Optical Unit to the
UA-6
The optical unit is plugged into the UA-6 “OPTICAL UNIT”
socket as shown in Figure 2-2. The optical unit can then be posi-
tioned close to the column while the detector/recorder component
remains on the lab bench. If the application calls for coldroom
operation, the optical unit can be placed inside the coldroom and
the detector left outside by passing the optical unit cable through
a port and completing the connection.
An optional 20 foot extension cable (P/N 68-1147-017) is
available for applications which require additional separation of
the optical unit and detector.
Each optical unit has a special mounting clamp which can be
used to clamp to a ring stand or mast, or by rotating the clamp 90
to the edge of a shelf.
Figure 2-2 Attaching an Optical Unit to the UA-6
Note
The optical unit should be mounted horizontally for proper
operation.