Operator’s Manual Simple AFG Application
41
You can assign the “
Arbitrary
”
waveform
using the “
Import
” button
of the command bar. For
more information refer to the “Import from File” section.
By default,
the “Arbitrary”
waveform is a
cosine function.
Note:
When Arbitrary waveform is selected the amplitude and offset of the original waveform are lost
because the waveform in normalized. Anyway, the amplitude and offset of the normalized waveform
can be modified as for any predefined waveforms.
Note:
In Stopped State the instrument stops at zero voltage level for all the waveforms except for:
•
Pulse Waveform
–
Stopped State: Low Level[V] if the polarity is positive or High Level[V] if the
polarity is negative.
•
Double Pulse Waveform
–
The stopped state is the Offset[V] parameter.