Q-Lite Satellite Modem Installation and Operating Handbook
6-23
received carrier rather than the Eb/No value being passed back from any
remote modem.
P300
This should be selected when interoperating with a P300-series modem.
Table 6-24 AUPC Method
6.2.3.6 Carrier Loss Action
Set
to
Nominal
The AUPC delta power is set to zero, causing the carrier to return to its
nominal power level.
Freeze
at
current value
The carrier power is frozen at its current value.
Set to max
The AUPC delta power is set to the maximum power limit as defined by
Maximum AUPC power offset.
Table 6-25 Carrier Loss Action
6.2.3.7 Local Demod Unlocked Action
Off
When set to
Off
, then the
Local demod unlocked action
has no effect and
only the
Carrier loss action
is used.
The distinction between the two carrier loss actions is as follows: The
Carrier loss action
covers the situation where the distant modem’s
demodulator has unlocked, resulting in no Es/No information being
available from the distant modem. In this situation, you may, for example,
want to increase the AUPC uplink level from the local modem to the
maximum. The
Local demod unlocked action
covers the situation where
the local demodulator has unlocked, also resulting in no Es/No
information being available from the distant modem. In this situation,
because there is no carrier being received from the distant modem, you
may, for example, want to set the AUPC uplink level from the local
modem to its nominal level since there is no indication in this scenario of
a problem with the distant modem receiving the local modem’s carrier.
Set
to
Nominal
The AUPC delta power is set to zero, causing the carrier to return to its
nominal power level.
Freeze
at
current value
The carrier power is frozen at its current value.
Set to max
The AUPC delta power is set to the maximum power limit as defined by
Maximum AUPC power offset.
Table 6-26 Local Demod Unlocked Action
