Teledyne ProEM Series, System Manual

Page: 147 / 162

147
Appendix C: Spectrograph Adapters
ProEM cameras for imaging are designed with a C-mount adapter to accommodate
C-mount lenses. Cameras for spectroscopy applications are designed with two
different bolt circle patterns to accommodate Teledyne Acton Research sliding tubes.
Before mounting your camera to a Teledyne Acton Research Series spectrograph, you
should follow the instructions in this appendix for attaching the appropriate
spectrograph kit and sliding tube.
NOTE:
When mounted to a spectrograph, the text on the back of
the ProEM should be right side up.
Table C-1 cross-references the adapter kits with the page number for the appropriate
instruction set.
Table C-1: ProEM-Spectrograph Adapter Kit Cross Reference
Spectrograph Adapter Kit Number
Information
begins on…
Teledyne Acton Research (ProEM with 3.60"/3.88"
Bolt Circles) page 148
Teledyne Acton Research (ProEM with C-Mount) page 149
Teledyne Acton Research SP-2350/SP-2550 (ProEM
with adjustable C- to spectroscopy-mount) 7050-0104 page 150
Teledyne Acton Research SP-2150/SP-2750 (ProEM
with adjustable C- to spectroscopy-mount) 7050-0107 page 151