Teledyne ProEM Series, System Manual

Page: 151 / 162

Appendix C Spectrograph Adapters 151
C.4 Adjustable C- to Spectroscopy-Mount Adapter (7050-0107 for
SP2150/SP-2750)
C.4.1 Assembly Instructions
1. Verify the shipping cover has been removed from the spectrograph’s camera port.
2. Place the flat side of the adapter plate against the face of the camera.
3. Insert the threaded insert through the center hole in the plate and screw the
adapter into the camera's C-mount.
4. Gently rotate the camera and sliding tube assembly as you insert it into the
spectrograph.
5. Secure the sliding tube with the two spectrograph setscrews (one coming down
from the top and the other from the side).
NOTE:
Adapter parts are machined to provide a tight fit. If you need
to remove the sliding tube from the spectrograph, first
loosen the two setscrews that secure it, and then rotate the
tube as you pull it out. If you have removed the sliding tube
from the spectrograph, rotate the sliding tube as you
re-insert it, and tighten the setscrews afterwards to secure
it. Forcing the tube into the spectrograph may permanently
damage the tube and the spectrograph opening.
Item Qty P/N Description
1. 1 Adapter Plate
2. 1 2518-1284 1.25"-32 Threaded Insert
2
1
441
1-
0
12
6
_
0
10
3