manualshive.com logo in svg

Teledyne Mini Compact Outdoor, Operation Manual

Share
Download
Teledyne Mini Compact Outdoor Operation Manual Download Page 9

Operations Manual, HPA3, Mini Compact Outdoor SSPA 

208143 REV C 

9 

1.0 Introduction 

 
This section provides the general information for the Teledyne Paradise Datacom LLC line of 
Mini Compact Outdoor Solid State Power Amplifiers. The Mini Compact Outdoor SSPA has 
been designed and manufactured to be an extremely robust and reliable amplifier.  It is well 
suited for harsh outdoor environments.   
 

1.1 Description 

 
The Mini Compact Outdoor SSPA is a smaller version of Teledyne Paradise Datacom’s  
popular Compact Outdoor SSPA. It is a one-piece integrated Satcom amplifier system which 
includes an AC/DC power supply, microwave amplifier module, microprocessor based moni-
tor and control circuitry, and an efficient thermal management system. The unit’s enclosure 
protects these components against the ingress of dirt and water. 
 
The reduced size and weight of this amplifier system allow it to be used in a wide variety of 
installations.  This amplifier is ideal for mounting on the boom of small antennas or anywhere 
that size and weight are a major concern. 
 
Features include: 
 

• 

Compact Size: 9.0 in x 12 in x 6.50 in. (229 mm x 305 mm x 165 mm) 

• 

Very light weight: Base units weigh as little as 24.5 lb.  (11.1 kg) 

• 

Auto-Sensing Power Factor Corrected Power Supply 

• 

RF Gain Adjustment: 55 dB to 75 dB minimum with 0.1 dB resolution 

• 

Output Power Detection 

• 

Output Power Sample Port 

• 

Internal 1:1 Redundant Capability 

• 

Serial (RS 232 / RS 485), Ethernet or Parallel Monitor & Control Circuitry 

• 

Windows Monitor & Control Software  

 
Available options include: 
 

• 

Optional L-Band Input Capability 

• 

Mounting kit 

• 

1RU Remote Control Panel 

• 

1:2 Redundant Capability with external 1RU Redundant Control Panel 

 

1.2 Specifications 

 

Refer to 

Appendix A 

for full specifications of the Mini Compact Outdoor SSPA.  

 

Section 1: General Information 

Summary of Contents for Mini Compact Outdoor























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands