manualshive.com logo in svg

Teledyne Mini Compact Outdoor, Operation Manual

Share
Download
Teledyne Mini Compact Outdoor Operation Manual Download Page 47

Operations Manual, HPA3, Mini Compact Outdoor SSPA 

208143 REV C 

47 

Section 5: Fiber-Optic Option 

5.0 Fiber-Optic Option 

 

 

The Mini Compact Outdoor Solid State Power Amplifier is available with an external fiber-
optic conversion box, OFM-1000. This configuration requires the addition of a 1RU RCPF-
1000 Fiber Optic Control Panel. 
 

5.0.1 RCPF-1000 Fiber Optic Controller 

 
The RCPF-1000 Fiber Optic Controller provides easy remote monitor and control of the  
Compact Outdoor SSPA with an external fiber-optic interface. Control of the RCPF-1000 can 
be handled through front panel operation or remotely via parallel or serial communication to a 
remote computer running Teledyne Paradise Datacom’s Universal M&C software. 
 
The RCPF-1000 front panel includes 10 LEDs that indicate the internal state of the Mini  
Compact Outdoor SSPA. Five fault condition LEDs on the left side of the front panel indicate 
any SSPA major faults, in addition to a summary fault state.  

A 2 line by 40 character LCD provides an extremely user friendly interface. Virtually all of the 
controller’s setup and adjustments are accessible from the LCD. Four navigation buttons and 
a separate Enter key allow the user to navigate the firmware menu on the LCD. Separate but-
tons have been provided for frequently used functions. A range of RF hardware options is of-
fered to meet specific system requirements. 
 
The rear panel features ports for Serial Main (J4), Serial Local (J5) and Parallel I/O connec-
tions, as well as N-type connectors for L-Band Tx and Rx paths, and FC/APC connectors for 
Fiber Tx and Rx paths. 
 
A complete description of the operation of the RCPF-1000 Fiber Optics Controller can be 
found in its operations manual, Teledyne Paradise Datacom document number 204640. 

Figure 5-1: RCPF-1000 front, rear panels 

Summary of Contents for Mini Compact Outdoor























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands