Testing the DVS Post Upgrade of DSP/PIO Board Replacement
page 6 of 21
Teledyne RD Instruments
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Testing the DVS
Before deploying the DVS, it is a good idea to make sure that it is working properly.
Built-In Tests
This simple test checks that the DVS is able to communicate with the computer and runs
the diagnostic tests.
To run the Built-In Tests:
1. Connect and power up the DVS as shown in Figure 1.
2. Start the
DVS
software.
3. At the
DVS Wizard Startup Options
screen, click
Test a DVS
. Click
Next
.
4. On the
Test DVS
screen, select
Run All Tests
(includes the recorder test) or
Run
Individual Tests
and select the desired tests.
