Teledyne e2v Eliixa+ EV71YC2MCL8005-BA0, User Manual

Page: 49 / 71

U
SER
M
ANUAL
8
K
/4
K
CL M
ONO
– R
EV
I – 06/2017
P
A G E
| 49

Save & Restore LUT in User Banks : The LUT loaded in RAM memory can be saved or restored in/from
4 User banks.
These functions are available in the LUT/Save & Restore LUT Settings section :
o
Restore LUT from Bank ( RestoreLUTFromBank ) : Restore the LUT from a User Bank in the current
RAM Memory.

Read function : “ r rlut ” : Get the current LUT Bank used
Returned by the camera : 1 to 4 for User banks

Write function : “ w rlut <val> ” : Bank <val> 1 to 4 for User banks
o
Save LUT in User Bank ( SaveLUTToBank ) : Save current LUT in User Bank

Can not de read

Write function : “ w slut <val> ” : User bank <val> if from 1 to 4.
The bank number <val> is given in ( LUTSetSelector )
LUT User Bank Usage
At the power up :
- Last User Bank used is loaded in RAM
7.6.1 Command Tables
Feature Commands Description
LUTEnable r lute Get LUT status
w lute 0 Disable LUT (“False”)
w lute 1 Enable LUT (“True”)
No direct feature r lutc <addr> Read 128 LUT coefficients starting from address <addr> from 0 to
4095-128. Return value is in hexadecimal, without space between
values. (one unsigned char per coef)
w lutc <addr>
<val>
Write 128 LUT coefficients starting from address <addr> from 0 to
4095-128. <val> is the concatenation of individual LUTvalue,
without space between values.
Feature Commands Description
RestoreLUTFromBank r rlut Get the current LUT bank (saved or restore)
w rlut <val> Restore current LUT from LUT bank number <val>, from 1 to 4;
<val> comes from LUTSetSelector.
SaveLUTToBank w slut <val> Save current LUT to LUT FFC bank number <val>, from 1 to 4;
<val> comes from LUTSetSelector.
User1
User2
User3
User4
User banks
Ram Memory
Save
Load
Upload/load from/to a Txt file