This document does not contain any export-controlled information.
Installation
22
Quasar CP-6302 Range Installation Manual - Ver. 5 - December 24, 2021
Step 1
Place the smaller, green sponge
inside the bracket and route the
cables through the center of it,
as shown. You might need to cut
a slit in the sponge.
Step 2
Place the larger, black sponge
inside the bracket, as shown.
Route the cables through the
pre-cut cross in the sponge.
Step 3
Route the cables through the
bracket.
Step 4
Affix the bracket to the wall using
the appropriate screws and
screw anchors (not provided).
Step 5
Use the Allen key and a hex
head cap screw to assemble and
firmly affix the camera's pendant
cap to the bracket.
