Teledyne 2150EX, Installation And Operation Manual, Page: 120 / 146

2150EX Area Velocity Flow Module
Appendix C Material Safety Data Sheets
C-10
Section 8 – Exposure Controls/Personal Protection
Engineering Controls: Use exhaust ventilation to keep the airborne concentrations below the exposure
limits.
Respiratory Protection: Use NIOSH approved respirator when the air quality levels exceed the TLV's.
Skin Protection:
Light gloves will protect against abrasion and drying of the skin.
Eye Protection: Safety glasses.
Component Name Exposure Limits
OSHA
PEL
ACGIH
TLV
Other
Recommended
Limits
Silica gel TWA 20 mppcf
(80 mg / m
3
% SiO
2
)
TWA 10 mg / m
3
NIOSH REL
TWA 6 mg / m
3
IDLH 3000 mg / m
3
Phenolphthalein Not Applicable Not Applicable Not Applicable
Section 9 – Physical and Chemical Properties
Appearance: Yellow beads or granules Vapor Density: Not applicable
Odor:
None
Boiling Point: 4046
q
F (2230
q
C)
Physical State: Solid bead Melting Point:
3110
q
F (1710
q
C)
PH: Not applicable Solubility: Insoluble in water
Vapor Pressure:
Not applicable
Specific Gravity:
2.1
Section 10 – Stability and Reactivity
Stability: Stable
Conditions to avoid:
Moisture and high humidity environments.
Incompatibility: Water, fluorine, oxygen difluoride, chlorine trifluoride
Hazardous Decomposition Products:
None
Hazardous Polymerization: Will not occur