WB Interface
WB/4-20mA CONVERTER
USER MANUAL
8
NPMWBEN
Revision A.0
5
Digital Modules
5.1
Switching on
It is firstly ascertained that all connections are made and that the entire installation
complies with the current standards in force.
As soon as the WB interface is powered up, it is ready for use and the GREEN light-emitting diode
is lit (Figure 1, Ref. 4)
5.2
Switching off
The device is switched off essentially by shutting down the power supply at an electrical cabinet.
The green LED goes out.
5.3
Settings
The handling and setting operations described in this section are intended strictly
for authorised persons only as they are liable to affect the safety of the detection
function.
Figure 4
Summary of Contents for MX32v2
Page 1: ...NP32V2EN Revision D 0 NPMWBEN Revision A 0 WB INTERFACE WB 4 20mA CONVERTER...
Page 4: ...WB Interface WB 4 20mA CONVERTER USER MANUAL IV NPMWBEN Revision A 0...
Page 18: ...WB Interface WB 4 20mA CONVERTER USER MANUAL 14 NPMWBEN Revision A 0...
Page 19: ...WB Interface WB 4 20mA CONVERTER USER MANUAL NPMWBEN Revision A 0 15...
