Teledyne Lecroy IQS25, Operator'S Manual

Page: 37 / 88

Operator’s Manual
29
Electrical Inputs
Touch the Electrical Inputs workflow button to access the OMA’s electrical configuration dialogs.
Electrical Inputs
The Electrical Inputs dialog is used to specify which channels on the acquisition module receive which RF
outputs ( X-Pol I , X-pol Q , etc.).
Coherent Receiver
The Coherent Receiver dialog is used to select the calibration script used by the receiver.
If using a Teledyne LeCroy IQSxx or a legacy Coherent Solutions IQScope-RT, select IQScope.
The IQScope Connected status checkbox will turn green when the software detects an IQScope via USB
interface.
If using a third-party coherent receiver, select Custom, then touch Browse and select your custom
calibration script (.CRS) file.
NOTE: The default script is located on the oscilloscope hard drive in D:\Scripts. You may copy the sample
script below and use this as the basis for your custom script.