4
Mounting the Tray
1
Place the tray on the base of the autosampler.
Make sure the locating pins on the tray fully seat into the locating holes in the base.
Installing the Stirrer
When the autosampler is used for oils, install the stirrer paddle. When the autosampler is
used for coolants, the stirrer paddle should be removed (or replaced with the optional
coated coolants stirrer paddle).
1
Locate the oils stirrer paddle.
F
IGURE
4
Stirrer Paddle for Oils
2
Press the stirrer paddle into the hole on the bottom of the stirrer motor.
F
IGURE
5
Inserting the Stirrer Paddle
3
Place the stirrer motor into the larger hole in the probe/stirrer block on the Z-drive.
F
IGURE
6
Placing the Stirrer Motor
