12
Switching Between Coolant and Oil Samples
1
Move the rinse station to the appropriate position. The status LED on the front of the
autosampler will show green for the oils position or blue for the coolants position.
F
IGURE
16
Rinse station in coolants (left) and oils (right) position.
2
Moving the rinse station will automatically switch to the appropriate peristaltic pump on the
back of the autosampler. Visually verify that the tubing is directed to the correct rinse supply
and waste containers.
3
Replace the sample probe with the appropriate version.
4
Replace the stirring paddle with the appropriate version. For oils, use the oils paddle. For
coolants, remove the paddle or use the optional coolants paddle (identified by a black band).
5
If using an
ASXP
RESS
P
LUS
Rapid Sample Introduction System, either replace the valve and
tubing, or use a second valve/pump module which has been set up for oils or coolants.
