TO CHANGE PHONES AFTER PLACING A CALL ON HOLD
1. Place the call on hold at the Opal.
2. Pickup the call at another telephone. The Opal will detect the pickup and
remove the hold condition at the original Opal.
TO MUTE SPEAKERPHONE AND HANDSET CALLS
1. Press the MUTE key, the red LED below the MUTE key will light. The
party on the other end will not hear you when the MUTE key is depressed.
2. Press the MUTE key again to turn off the mute feature, the MUTE LED will
go out.
REDIAL
TO REDIAL THE LAST TELEPHONE NUMBER DIALED:
1. Lift the handset from the cradle, or press the SPEAKERPHONE key.
2. Press the REDIAL key.
NOTE: Some PBX’s require a pause after the first digit to access an outside
line. The REDIAL function will automatically insert a pause if the dialed
number is 7 digits or more. The inserted pause will be of the same duration
as set in the pause timing.
FLASH
The Flash key, when programmed behind an autodial key provides a timed
line interrupt typically used for accessing PBX/CO features like transfer and
conference. The timing of the hookflash is programmable with the factory
default timing set to 600 milliseconds. Some PBX’s may require you to
change the hookflash timing from the default to 600ms.To change the
hookflash timing;
1. Lift the handset.
2. Press the STORE key (see diagram on page 6 for key location).
3. Press the FLASH key (see diagram on page 6 for key location).
4. Select 1 - 9 on the DTMF pad. The number selected will be the new flash
timing in milliseconds (ie: “3” = 300 milliseconds).
5. Press the STORE key.
ADJUSTING THE HANDSET VOLUME
The HANDSET VOLUME key has three levels. When the handset is first
lifted, the handset volume is NORMAL.
Locate the HANDSET VOLUME key below the keypad. Press the key
once and the volume level will increase one level (to MEDIUM volume).
Press the key once more and the volume level will increase an additional
level (to HIGH volume). To return the handset volume to NORMAL, press
the handset volume key again. The handset volume will always return to
NORMAL when the handset is returned to the cradle.
3
