8
It is important to note that if TIME INTERVAL REPLACEMENT is activated and the line cord to the Millennium is disconnected,
causing the Millennium to lose power, the internal timer will reset to zero. Once power is restored the timer will restart and
WELCOME MESSAGE #1 will be displayed.
See PROGRAMMING THE MILLENNIUM on page 10 for information on how these messages are stored and the display options
are selected.
EXPRESS SERVICE SELECT
The Millennium’s EXPRESS SERVICE SELECT function is a name and number electronic phone book. Entries can be up to 15
numbers to be dialed with a 15 character description.
When a guest presses the MENU key, instructions will be displayed on the LCD.
Continue pressing MENU to go through each programmed selection. When the guest locates the service they want to
call, pressing SELECT will activate the speakerphone and dial the selected service.
The EXPRESS SERVICE SELECT information is stored in nonvolatile memory and will not be erased or lost when AC
and/or line power is interrupted.
See PROGRAMMING THE MILLENNIUM on page 15 for information on how to store EXPRESS SERVICE SELECT
information.
LCD BACKLIGHTING
When the Millennium telephone is in use, or there is an incoming call, the LCD display will light up for ease of use. The
LCD’s backlight is illuminated when the MENU key is pressed, outbound call is initiated, or when the phone is ringing.
After a specified period of time, between 10 and 80 seconds in increments of 10 seconds, the backlight will go off. The
WELCOME MESSAGE will continue to be displayed and can be read by the guest. You can also choose to have the
backlight permanently on or off. The factory default is set for 30 seconds.
See PROGRAMMING THE MILLENNIUM on page 16 for information on how to set the backlight information.
