4
OR
Press the SPEAKER key. The Millennium will select the appropriate “idle” line.
NOTE: The red SPEAKER LED will indicate that the speakerphone is active.
2. Listen for dial tone. Dial the desired number, or press a GUEST SERVICE AUTO DIAL key to automatically dial a
pre-programmed number.
3. To end call the call press the SPEAKER key again.
RECEIVING A CALL
An audible ring and a flickering red LED indicate an inbound call.
USING THE HANDSET
1. Lift the handset. The Millennium will select the ringing line.
2. To end the call hang up the handset.
USING THE SPEAKERPHONE
1. With the handset in the cradle, press the line key associated with the ringing line. The Millennium will go off hook
answering the ringing line with the speakerphone active.
OR
2. Press the SPEAKER key. The Millennium will select the ringing line and answer with the speakerphone active.
Note: The red SPEAKER LED will indicate that the speakerphone is active.
CONFERENCE CALLS
The CONFERENCE key allows the user to originate or to include two parties in a three-way phone conversation. Typical
conference calls would be initiated by;
-User initiates two (2) calls
-User initiates one (1) call after receiving a call
-User includes two (2) callers
USER INITIATES TWO (2) CALLS:
1. Place call to first party.
2. Place the first party on hold by pressing the HOLD key.
3. Place call to second party using the available, unused line.
4. Press the CONF key. The parties will be connected.
The LCD will display:
USER INITIATES ONE (1) CALL:
1. Receive call from first party.
2. Place caller on hold by pressing the HOLD key.
3. Place call to second party using the available, unused line.
4. Press the CONF key. The parties will be connected and the display will change as indicated above.
