background image

 

 

 
 

 

                                                                                                                                             1 

Introduction 

The Product 

 
The product is based on the IEEE 

802.11g

 standard, which is the latest 

54Mbps

 Wireless LAN 

(WLAN) standard. This standard is five times faster than the widely deployed 

WiFi

 (802.11b) 

products that are found in homes, airport and public wireless hotspots. Because 802.11g uses the 
same 

2.4GHz

 frequency band, the product is fully interoperable with existing WiFi cards and 

devices. 
 
Having two wireless protocols in one product ensure that your investments are protected, while 
enabling you to enjoy the fastest Wireless LAN speed. 
 
The product is a combination of 3 devices: 

a. 

Wireless LAN Access Point (AP) compliant to 802.11b and 802.11g standards. 

b. 

Wireless Ethernet Bridge. 

c. VDSL 

Converter. 

 
The product is an all-in-one device that allows multiple PCs to share a network.  

Product Features 

 

  Fully compatibility with 

IEEE 802.11g

 WLAN standard 

  Wireless data rate of up to 

54Mbps 

 

2.4GHz

 license-free frequency band

 

  Full backward compatibility with 

802.11b

 standard (WiFi 11Mbps) 

 

802.1x

 Authentication.

 

Used with a RADIUS server to check and verify the identity of 

WLAN users. 

 

WEP 

(Wired Equivalent Privacy). A simple WLAN encryption standard to protect wireless 

data from sniffers. 

 

WPA 

(WiFi Protected Access). An improved WLAN encryption standard where the secret 

key changes automatically at regular intervals. 

 

TKIP 

(Temporal Key Integrity Protocol). When used with a corporate RADIUS 

server, the WLAN encryption key is changed regularly. Used for high security 
enterprise networks. 

 

Pre Shared Key.

 For the home user without a RADIUS server. A new key is 

generated each time the PC connects. 

  Intuitive Web-based configuration 
 

Access Control List

 provides added security 

Summary of Contents for IWLAN























Reviews: