15
Enable Telnet
: Disable/enable Telnet access to this device
Request Internet Access
: TBA
Restore Good Setting
: Restore last known good setting
Save the current setting as a backup
: After you have successfully configured ExpressPort
adapter, you can save this “Good Config” into memory. You can retrieve this “Good Config” later,
if you have messed up some settings and do not know what was the previous working setting. If
you have even forgotten the password to get into the configuration pages, you would have to do a
Factory Reset to ExpressPort adapter.
Restore settings from the backup
: Allows you to retrieve the “Good Config” that you have
saved previously.
Remember that after every configuration change, it is necessary to:
-
Click
Update
on the page.
-
Reboot
ExpressPort adapter.
The changes take effect only
AFTER Reboot
.
