Teledex iPhone SIP ND2100 Series s User Manual Download Page 9

Page: 9 / 10

7. Appendix A – European Requirements

This product complies with the following CE requirements:

89/336/EEC EN 55024

EN 55022 EN 60950 (CB SCHEME)

8. Appendix b – SIP ND2100 Series Product Specifications
TELEPHONE TYPE

Single-line, Voice over Internet Protocol network terminal

Call Manager Protocol

SIP (Session Initiation Protocol)

Dial Keypad

12 keys: Numeric 1 – 9, 0, *, #
Capable of DTMF signaling

Speed (Memory) Dialing Keys

SIP ND2105, SIP ND2105S: 5 programmable keys
SIP ND2110, SIP ND2110S: 10 programmable keys

Function Keys

Hold, Mute, Messages, Flash, Redial, Store, Pause,
Volume (Up/Down), Speaker (SIP ND2105S, SIP ND2110S only)

LEDs:

Message Waiting, Mute,

Speaker (SIP ND2105S, SIP ND2110S only)

Network Connection

Ethernet 10/100BaseT, RJ-45 connector, 2 ports
(One supporting PoE)
Uplink to network and switch
Pass-through, switched, for local PC

Audio Input/Output

Handset (included), RJ-10 connector
Microphone (built-in)
Speaker (built-in)

Power

Power supplied from network switch (PoE), or from
approved local power adapter

Dimensions

6.0”x 9.0”x 2.32”

Weight

2.0 lb.

9. Appendix C – Product Support

If you need technical assistance with this product,
please contact Teledex via one of the following methods:

Telephone

408.363.3100

Email

[email protected]

Internet

www.teledex.com

If you feel that the information contained herein does not
represent the way your product is operating, check our
website (www.teledex.com) for the latest version
of this documentation.

Summary of Contents for iPhone SIP ND2100 Series s











Search results

Summary of Contents for iPhone SIP ND2100 Series s

Reviews:

Related manuals for iPhone SIP ND2100 Series s

Brands by name

Popular brands

Teledex iPhone SIP ND2100 Series s, User Manual

Search results

Summary of Contents for iPhone SIP ND2100 Series s

Reviews:

Related manuals for iPhone SIP ND2100 Series s

Brands by name

Popular brands