background image

I SERIES ANALOG USER GUIDE   

www.teledex.com 

5

the customer as soon as possible. Also, you will 
be advised of your right to file a complaint with 
the FCC if you believe it is necessary.

The telephone company may make changes in its 
facilities, equipment, operations, or procedures 
that could affect the operation of the equipment. 
If this happens, the telephone company will 
provide advance notice in order for you to 
make the necessary modifications to maintain 
uninterrupted service.

If trouble is experienced with this equipment, for 
repair or warranty information, please contact 
Teledex at (800) 462-9446. If the equipment is 
causing harm to the telephone network, the 
telephone company may request that you disconnect 
the equipment until the problem is resolved.

There are no user-serviceable parts contained in 
this equipment.

Connection to party line service is subject to 
state tariffs. Contact the state public utility 
commission, public service commission, or 
corporation commission for information.

If your home has specially wired alarm equipment 
connected to the telephone line, ensure the 
installation of this product does not disable your 
alarm equipment. If you have questions about 
what will disable alarm equipment, consult your 
telephone company or a qualified installer.

This telephone is hearing aid compatible.

These telephone devices are intended for 
commercial use only, primarily in hotel guestrooms. 
They must be used with a PBX (private branch 
exchange), and are not intended to be connected 
directly to a PSTN line (public switched telephone 
network). There are no user-serviceable parts 
inside the equipment.

Technical Specifications

This guide covers product made from 2009 
forward with a serial number beginning with XX. 
For all other models please refer to the Teledex 
website for legacy product documentation.

DIMENSIONS

6.0” (w) x 9.0” (l) x 3.375” (h)

WEIGHT

With handset: 2.0 lbs.

POWER ADAPTER

7.5VDC 300mA Adapter (for cordless HDKIT)

9 VDC 300mA (Pass through adapter for cordless 
telephone)

User Guides

If additional User Guides are needed, please go 
to www.teledex.com to download the PDF.

Service

When problems arise that cannot be resolved 
using this or related documents, please go to 
www.teledex.com/support for information about 
customer support, technical support, warranty, 
and product returns.

Statement of Limited Warranty

Teledex product warranty information is available 
at www.teledex.com.

Summary of Contents for A Series























Reviews: